| Index | Rundeck: P1SoM40 | Created: Thu May 9 03:30:17 EDT 2024 |
SEAICE.f
Summary: Author :
Version:
Modules:
- SEAICE
- SEAICE contains all the sea ice related subroutines
- SEAICE_COM
- SEAICE_COM contains the model arrays for seaice
Global Subroutines:
- alloc_seaice_com
- To allocate arrays whose sizes now need to be determined at
run-time
- altstyle_seaice_ic
- altstyle_seaice_ic reads sea ice state from an alternate
style IC file with temperature,salinity (intensive units)
and converts to the per-layer heat,salt (extensive units
J/m2, kg/m2) provided by the traditional IC file.
Other fields (ice mass, meltponds etc.) in the alternate file
are the same as in the traditional file.
For the moment, temperature and salinity in the IC file are
specified via
1. tsnow_top (K), the temperature at the top of any
snow existing on the ice
2. tsi_top (K), the temperature at the top of the ice
(i.e. snow base)
3. salt (psu), the mean salinity of the ice
Temperature is piecewise linearly interpolated between
1. tsnow_top and tsi_top
2. tsi_top and the ocean temperature tfo
Before trying to understand this subroutine, see module
SEAICE for explanation of
1. the distinction between mass layers and thermal layers
2. the blending of ice and snow in thermal layers
3. ACE1I
- def_rsf_seaice
- def_rsf_seaice defines seaice array structure in restart files
- new_io_seaice
- new_io_seaice read/write seaice arrays from/to restart files
- read_seaice_ic
- read_seaice_ic read sea ice initial conditions file.
Depends on the following files:
Used by the following files: